欢迎访问《地震》,

地震 ›› 2020, Vol. 40 ›› Issue (2): 117-129.doi: 10.12196/j.issn.1000-3274.2020.02.009

• • 上一篇    下一篇

北天山地区震源机制与构造应力场特征

李艳永1, 王成虎2, 朱皓清1, 乌尼尔1   

  1. 1.新疆维吾尔自治区地震局, 新疆 乌鲁木齐 830011;
    2.中国地震局地壳应力研究所, 北京 100085
  • 收稿日期:2019-06-12 出版日期:2020-04-30 发布日期:2020-04-24
  • 作者简介:李艳永(1984-), 男, 河南上蔡人, 工程师, 主要从事震源机制和构造应力场研究。
  • 基金资助:
    中国地震局“三结合”课题(3JH-201901016); 国家自然科学基金项目(41574088); 地震科技星火计划项目(XH18055); 新疆地震科学基金(201903, 201906)

The Focal Mechanism and Stress Field Inversion in Northern Tianshan Mountain

LI Yan-yong1, WANG Cheng-hu2, ZHU Hao-qing1, WU Ni-er1   

  1. 1.Earthquake Agency of Xinjiang Uygur Autonomous Region, Urumqi 830011, China;
    2.Institute of Geology, China Earthquake Administration, Beijing 100085, China
  • Received:2019-06-12 Online:2020-04-30 Published:2020-04-24

摘要: 本文利用新疆测震台网记录的宽频带波形数据, 采用CAP方法反演北天山地区2010—2018年MS≥3.0地震震源机制解, 进一步结合早期研究区的震源机制数据反演了应力场。 结果表明, 研究区地震破裂类型以逆断型和走滑型为主, 其次为正断型, 过渡型最少; P轴方位大体与北天山地区主要断裂构造的走向垂直, 研究区以中部和西部近NS向以及东部近NNE向的水平挤压作用为主; 分区反演应力场显示研究区北部最大主应力轴σ1方位由西到东呈NNW—NS—NNE渐变过程, 研究区南部最大主应力轴σ1方位自西向东先呈NS—NNE变化, 再呈NNW—NS—NNE渐变; 研究区R值普遍较大, R值较小的区域主要位于研究区的西部和东部, 说明研究区东部和西部部分R值较小的地区向东西方向的扩展分量较小, 主要表现为物质的隆升分量。

关键词: 震源机制, 应力场, CAP方法, 北天山

Abstract: In this paper, based on the broadband waveform data recorded by Xinjiang Seismic Network, the focal mechanism of MS≥3.0 earthquake from January 2010 to December 2018 are inverted by CAP method in northern Tianshan mountain. Combined with the focal mechanism data in the early stage, the stress field in the study area is inversed. The results show that the seismic rupture types are mainly thrust type and strike-slip type, followed by normal fault type, and the transition type is the least in the study area. The azimuth of P axis is generally perpendicular to the strike of the main fault structures in northern Tianshan mountain. The western and central region stress field is mainly under action of the level extrusion of NS, and the eastern region stress field is mainly under action of the level extrusion of NNE. The azimuths of the maximum principal compressive stress of the northern region stress field present the gradual process of NNW-NS-NNE from west to east, the azimuths of the maximum principal compressive stress of the southern region stress field present the process of NS-NNE-NNW-NS-NNE from west to east; The R value of the study area is generally large, and the areas with small R value are mainly located in the western and eastern of the study area. It indicates that the expansion component is small in the east and west direction, which is mainly manifested as the uplift component of the material.

Key words: Northern Tianshan mountain, Focal mechanism, Stress field, CAP method

中图分类号: