欢迎访问《地震》，
地震

地震 ›› 2013, Vol. 33 ›› Issue (1): 22-28.

• • 上一篇    下一篇

地震计灵敏度的对比测量法

林湛1, 薛兵1, 朱小毅1, 陈阳1, 李江1, 彭朝勇2, 刘洋君3   

  1. 1.中国地震局地震预测研究所, 北京 100036;
    2.北京港震机电技术有限公司, 北京 102628;
    3.浙江省地震局, 浙江 杭州 310013
  • 收稿日期:2012-03-02 修回日期:2012-08-24 出版日期:2013-01-31 发布日期:2020-10-16
  • 作者简介:林湛(1982-),男,山东济南人,助理研究员,主要从事地震预测设备检测技术及相关软件研发工作。
  • 基金资助:
    中国地震局地震预测研究所基本科研业务专项(2010IES0201)

A Relative Determination Method for Seismometer Sensitivity

LIN Zhan1, XUE Bing1, ZHU Xiao-yi1, CHEN Yang1, LI Jiang1, PENG Chao-yong2, LIU Yang-jun3   

  1. 1. Institute of Earthquake Science, CEA, Beijing 100036, China;
    2. Geodevice Company, Beijing 102628, China;
    3. Earthquake Administration of Zhejiang Province, Hangzhou 310013, China
  • Received:2012-03-02 Revised:2012-08-24 Online:2013-01-31 Published:2020-10-16

PDF (PC)

325

摘要： 本文提出一种地震计灵敏度的对比测量法, 该方法将被测地震计和一台校准过的地震计比邻、 平行摆放, 共同记录地振动数据, 通过对比分析两台地震计的输出信号, 计算被测地震计的灵敏度。 与振动台测量法相比, 该方法成本低, 与电测法相比, 不需已知地震计的标定常数, 是一种简单易行、 精度高的地震计灵敏度测量方法。

关键词: 地震计, 灵敏度, 标定, 对比测量, 振动台, 电测法

Abstract: A relative determination method for seismometer sensitivity is introduced in this paper. The test seismometer and a carefully calibrated seismometer are put side by side and oriented in the same direction so that they can record the same ground motion. By analyzing the output signals from both seismometers, we can calculate the sensitivity of the test seismometer. Compared with using a shake table, this method is economically low cost. Compared with the electrical method, it does not involve the calibration constant. It is an accurate method to test seismometer sensitivity and it′s easy to carry out.

Key words: Seismometer sensitivity, Calibration, Relative determination, Shake table, Electrical method

中图分类号: